Every snowboard skin is custom sized to your board using the longest and widest points you provide. No standard sizing. No guesswork.
Yes, because each skin is made to order, it fits all snowboard sizes and shapes.
Installation is straightforward, even if it’s your first time.
Plan for:
- 5-10 Minutes
- A clean, warm space
- A second person for easier alignment
Following our installation guide ensures the best results.
Install Instructions
Included:
- Squeegee
You’ll need:
- Warm soapy water (cleaning)
- 70–90% isopropyl alcohol (final wipe)
- Lint-free microfiber cloth
- Utility or X-Acto knife
- Hair dryer or heat gun
- Scotch-Brite pad (minor surface prep)
Optional:
- Goo Gone or Rapid Remover (for old adhesive residue)
Our materials are rated for up to 4 years.
Early test skins on personal boards have lasted significantly longer.
Proper care and storage will extend lifespan.
Our adhesive is forgiving during install and allows repositioning early on.
Once heavy pressure is applied or the adhesive fully cures, repositioning may not be possible.
If you think you’ve made an unrecoverable mistake, email shopskinify@gmail.com and we’ll help evaluate your situation.
No, our skins are designed to remove cleanly when heated and removed properly.
In rare cases, minor adhesive residue may remain and can be safely removed with:
- Isopropyl alcohol
- Goo Gone or similar products
You may upload any image you have the rights or permission to reproduce. We assume all uploaded content is authorized by the customer.
Got a specific question you'd like answered? Fill the form below and one of our experts will happily assist you.